產品詳情
Product Center
| 項目 | Item | 單位 | Z110 | |||
| 注射裝置 | INJECTION UNIT | A | B | C | D | |
| 螺桿直徑 | Screw diameter | mm | 32 | 35 | 38 | 42 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 137 | 163 | 192 | 235 |
| 注射重量 | Injection weight(ps) | g | 125 | 148 | 175 | 213 |
| 注射速率 | Injection rate | g/s | 74 | 89 | 105 | 128.1 |
| 注射壓力 | Injection pressure | Mpa | 260 | 219 | 186 | 152 |
| 螺桿轉速 | Screw speed | rpm | 210 | |||
| 鎖模裝置 | CLAMPING UNIT | |||||
| 鎖模力 | Clamping force | kN | 1100 | |||
| 移模行程 | Open stroke | mm | 350 | |||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 370×370 | |||
| 最大模厚 | Max.Mold height | mm | 380 | |||
| 最小模厚 | Min.Mold height | mm | 150 | |||
| 頂出行程 | Ejector stroke | mm | 100 | |||
| 頂出力 | Ejector stroke | kN | 38 | |||
| 其他 | OTHERS | |||||
| 最大油泵壓力 | Max Pump pressure | kW | 16 | |||
| 油泵電機功率 | Pump motor power | kW | 13 | |||
| 電熱功率 | Heating power | kW | 7.5 | |||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 4.32×1.27×1.90 | |||
| 油箱容積 | Olitank cubage | L | 230 | |||
| 機器重量 | Machine weight | t | 3.4 | |||
