產品詳情
Product Center
| 項目 | Item | 單位 | Z460/JD | ||
| 注射裝置 | INJECTION UNIT | A | B | C | |
| 螺桿直徑 | Screw diameter | mm | 70 | 75 | 80 |
| 理論注射容量 | Shot volume(theoretical) | cm3 | 1500 | 1723 | 1960 |
| 注射重量 | Injection weight(ps) | g | 1365 | 1567 | 1784 |
| 注射速率 | Injection rate | g/s | 344 | 395 | 449 |
| 注射壓力 | Injection pressure | Mpa | 199 | 173 | 152 |
| 螺桿轉速 | Screw speed | rpm | 160 | ||
| 鎖模裝置 | CLAMPING UNIT | ||||
| 鎖模力 | Clamping force | kN | 4600 | ||
| 移模行程 | Open stroke | mm | 740 | ||
| 拉桿間距(寬×高) | Space between tie bars(W×H) | mm | 770×770 | ||
| 最大模厚 | Max.Mold height | mm | 780 | ||
| 最小模厚 | Min.Mold height | mm | 250 | ||
| 頂出行程 | Ejector stroke | mm | 200 | ||
| 頂出力 | Ejector stroke | kN | 110 | ||
| 其他 | OTHERS | ||||
| 最大油泵壓力 | Max Pump pressure | kW | 16 | ||
| 油泵電機功率 | Pump motor power | kW | 45 | ||
| 電熱功率 | Heating power | kW | 30.7 | ||
| 外形尺寸(長×寬×高) | Machine dimension(L×W×H) | m | 7.98×1.90×2.30 | ||
| 油箱容積 | Olitank cubage | L | 720 | ||
| 機器重量 | Machine weight | t | 16 | ||
